Velleman NVR4 Guide D'installation Rapide page 10

2. In the playback panel, press the play button
3. The fast forward
repeatedly to increase/decrease the speed to 4x, 8x, 16x, or 32x (max.).
4. Press the pause button
5. Press the stop button
11. Push Status
The Push Status functions sends notifications about events to the EagleEyes app on your mobile device. You
can select what events you want to be notified about.
Prerequisites
Before using this function, check the following:
You have iPhone, iPad, or Android™ mobile phone or tablet.
•
You have subscribed to and you can access mobile internet services for your mobile phone.
•
• The mobile app, EagleEyes, is installed in your mobile device.
For details, see the section "Installing the EagleEyes" app below.
Configuring the WAN port
1. Make sure the NVR is properly connected to a switch with a RJ45 network cable.
2. On the NVR, select ADVANCED CONFIG > NETWORK > WAN.
Configuring Push Status
Before configuring push status, make sure that:
The NVR is set up as described above.
•
The NVR is connected to the internet.
•
On the NVR
1. Select ADVANCED CONFIG > NOTIFY > PUSH STATUS.
2. Set ACTION to ON.
3. Select the system event or events you want to get notified about on your mobile device.
V. 01 – 14/04/2014
and fast rewind buttons increase/decrease the playback speed. Press the button
to pause playback.
to stop playback and return to live monitoring.
NVR4
. The recorded files are shown.
10 ©Velleman nv