lopital Elexo 5100 Mode D'emploi page 33

Figure 6 to 9 Adjustable seating angle.
Figure 10 Locking pins.
To adjust the length of the leg support, you have to release the locking pin underneath
by loosen it a bit (See figure 10). Choose the right length for the leg support and tighten
the locking pin again.
Make sure that both the sitting angle and the length of the leg support are
locked properly as soon as they have to support a load.
Always place these parts on the seat as soon as you finish using them. This
prevents you from looking for the parts.
Setting the angle of the locking pin
Setting the length of the locking pin
Elexo Shower-toilet chair | Instructions for use | 33