Signature SFMP65FLIGNE Instructions D'utilisation page 23

6. Reminder Function:
The oven has 9 hours reminder, this function will help to remind you to start cooking in a certain time
from1 minute to 9 hours. Only when oven in standby mode and clock setting, the reminder can be set.
Follow below to set the reminder:
1> Press reminder setting button "
2> Rotate " K2 " to set the hour time of reminder.
3> Press reminder setting button "
4> Rotate "K2 " to set minute time of reminder.
5> Press " " to confirm cooking.
Note: After the set time, the oven buzzer will sound for 10 times, "
screen
to remind you to start cooking. You can cancel the reminder during setting by pressing "
7. Start/Pause/Cancel Function
1> If the cooking time has been set, press "
to resume cooking.
2> During cooking process, press "
cooking.
8. Energy-Saving Function
1> During in waiting state and reminding state , press "
off and set to energy-saving mode.
2> If no operation in10 minutes under waiting state, the LED display will go off and go into energy-saving
mode.
3> Under the energy-saving mode, press any key or rotate any encoder can quit the energy-saving
mode.
9. Pyrolytic Function(only some modles)
This function allows you to clean thoroughly the oven cavity.
1>Rotate "K1" to select the pyrolytic function. LED will display "PYA".
2>Press " " to confirm the cooking. And the default time is 2 hours, "PYA" will display on the LED.
3
>Rotate "K1" to change the pyrolytic time. There have two levers time can be selected"1:30 or 2:00".
Note:A) When the oven door is not closed, press start button will be invalid, LED display "DOOR","PYA."
B) When the oven center temperature is highter than 200
state directly and the oven center temperature is highter than 300
"COOL".
C)When open the door in normal working condition, the relay for heater will stop working, LED display
"DOOR", the buzzer will beep continuously until the door closed or press the cancel button.
D)
When the pyrolytic function finished working and oven center temperature is lower than 300
display will go off.
E)
Before activating the pyrolytic cleaning function, remove any excessive spillage and make sure that
oven is empty. Do not leave anything inside it(e.g. pans, baking tray, dripping pan, slider bracket etc.)
as this could heavily damage them.
";
" again;
" to start cooking. If the cooking is paused, press "
" once to pause the cooking. Press "
" for three seconds, the LED display will go
C
O ,Press cancel button can return to waiting
21
"symbol disappears on the
" twice to cancel the
C
O , press start botton, LED display
" button;
"
C. LED
O