Disconnecting Your Bluetooth Device - Makita DMR201 Manuel D'utilisation

• Do not connect this USB socket with your PC
USB port, as it is highly possible that it may cause
breakdown of the units.
Pairing and connecting a device to
the speaker
You need to pair your Bluetooth device with the speaker
before you can auto-link to play/stream Bluetooth music
through the speaker. Pairing creates a `bond' so two
devices can recognize each other.
To have the better sound quality, we recommend setting
the volume to more than two-thirds level on your Bluetooth
device and then adjust the volume on the speaker as
required.
Pairing and playing your Bluetooth
device for the first time
1. Press the Power button
the Bluetooth indicator will flash in blue. The indicator
flashes fast flashing blue indicating the speaker is
discoverable.
2. Activate Bluetooth on your device according to the
device's user manual to link to the speaker. Locate
the Bluetooth device list and select the device named
'DMR201' with some mobiles (which are equipped
with earlier versions than BT2.1 Bluetooth device),
you may need to input the pass code "0000".
3. Once connected, there will be a beep sound and the
Bluetooth indicator will remain in solid blue. You can
simply select and play any music from your source
device. Volume control can be adjusted from your
source device, or directly from the speaker.
4. Use the controls on your Bluetooth-enabled device or
on the speaker to play/pause and navigate tracks.
Note:
1. If 2 Bluetooth devices, pairing for the first time, both
search for the speaker, it will show its availability on
both devices. However, if one device links with this unit
first, then the other Bluetooth device won't find it on the
list.
2. If your Bluetooth device is temporarily
to the speaker, then you need to manually reconnect
your device again to the speaker.
3. If 'DMR201' shows in your Bluetooth device list but your
device cannot connect with it, please delete the item
from your list and pair the device with the speaker again
following the steps described previously.
4. The effective operation range between the system and
the paired device is approximately 10 meters (30 feet).
Any obstacle between the system and the device can
reduce the operational range.
5. Bluetooth connectivity performance may vary depending
on the connected Bluetooth devices. Please refer to the
Bluetooth capabilities of your device before connecting
to the speaker. All features may not be supported on
some paired Bluetooth devices.
to turn on the speaker and
disconnected
Playing audio files in Bluetooth mode
When you have successfully connected the speaker with
the chosen Bluetooth device you can start to play your
music using the controls on your connected Bluetooth
device.
1. Once playing has started adjust the volume to the
required setting using the Volume buttons
on the speaker or on your enabled Bluetooth device.
When you press the Volume up/down button, the
volume indicator will flash in fast flashing red. If the
indicator light in solid red, it indicates the volume is in
maximum volume or minimum volume.
2. Use the controls on your device to play/pause and
navigate tracks. Alternatively, control the playback
using Play/Pause
buttons
3. Press and hold the Next track
to fast-forward/Rewind the current track. Release
the button when the desired point in the track is
reached.
Note:
1. That not all player applications or devices may respond
to all of these controls.
2. Some mobile phones may temporarily disconnect from
the speaker when you make or receive calls. Some
devices may temporarily mute their Bluetooth audio
streaming when they receive text messages, emails or
for other reasons unrelated to audio streaming. Such
behaviour is a function of the connected device and
does not indicate a fault with the speaker.
Speaker memory and reconnecting
a device
The speaker can memorize up to 8 sets of paired device,
when the memory exceed this amount, the oldest pairing
history will be over written. If your Bluetooth device
already paired with the speaker previously, the unit
will memorize your Bluetooth device and it attempts
to reconnect with a device in memory which is last
connected. If the last connected device is not available,
the speaker will be discoverable.

Disconnecting your Bluetooth device

Press and hold the Bluetooth pairing button
seconds to disconnect with your Bluetooth device. The
Bluetooth indicator flashes in blue indicating the speaker
is discoverable again for pairing.
Playing music via auxiliary input socket
A 3.5mm Auxiliary input socket is provided on the right
side of the unit to permit an audio signal to be fed into the
unit from any devices that features a headphone or audio
output, such as an iPod, MP3 or CD player.
1. Connect a stereo or mono audio source (for example,
iPod, MP3 or CD player) to the Auxiliary input socket
(marked 'AUX') and the Aux in indicator turns green
indicating the speaker is in auxiliary input mode.
7 ENGLISH
, Next track
on the speaker.
or Previous button
, Previous track
for 2-3