Removing Infant Car Seat From Stroller; Folding Stroller With Icsa Attached; Removing Icsa From Stroller - BOB ICSA p03844200b Guide D'utilisation

BOB Gear by Britax
Removing Infant Car
Seat from Stroller
1� Prepare stroller
Set parking brake, recline stroller
seat, and rotate canopy towards
handlebar (see stroller user guide
if necessary).
2� Unfasten restraint belt
Unfasten buckle, place restraint
belt ends to sides of stroller seat�
3� Remove infant car seat
Activate release handle on infant
car seat then lift infant car seat
straight up and off stroller with
infant car seat carry handle.
Folding Stroller with
ICSA Attached
1� Remove infant car seat
Remove infant car seat from ICSA
(see previous section).
2� Empty stroller
Remove contents from low boy
cargo basket and pockets.
8
3� Fold handlebar
Squeeze both handlebar release
levers simultaneously (see stroller
user guide if necessary).
4� Rotate handlebar forward
Slightly rotate handlebar towards
seat and hold in place during next
step.
5� Lift red frame release handle
Using a short, quick tug, lift
red frame release handle up.
Keep tires on ground as stroller
collapses toward front wheel (see
stroller user guide if necessary).
Removing ICSA from
Stroller
1� Prepare stroller
Set parking brake, rotate canopy
towards handlebar (see stroller
user guide if necessary).
2� Remove ICSA from receivers
While pressing the seat release,
pull ICSA forward and out
of receiver sockets, keeping
alignment even, left to right, as
you pull�