EINHELL PROFI SILVER LINE PS-AS 14,4/1H Mode D'emploi page 9

Anleitung PS-AS 14,4_SPK1
ON/OFF switch (4)
Infinitely variable speed control is possible with the
ON/OFF switch. The further you push the switch, the
higher the speed of the cordless screwdriver.
Screws
It is advisable to use self-centering screws (e.g. Torx,
cross recessed head) as these will enable you to
work safely and reliably. Always make sure that the
bit used is of the same size and shape as the screw.
Set the torque to suit the screw size as specified in
the instructions.
Special additional functions (Figure 4):
Battery swivel mechanism
To handle work in hard-to-reach areas the
battery pack can be swiveled through 360°.
Cleaning and maintenance
Important! Always remove the battery pack before
starting cleaning or maintenance work.
1. Clean the tool at regular intervals, ideally
immediately after you finish working with it.
2. Do not clean the tool with sharp objects.
3. No liquids may be allowed to ingress into the
tool. Use soap suds and a soft cloth to clean the
casing. Never use gasoline, solvent or cleaning
products that are aggressive to plastic.
4. The ventilation slots must be clear at all times.
Technical data:
Motor supply voltage
Speed
Torque 17 settings
Clockwise/Counter-clockwise
Clamping range of drill chuck 0,8-10 mm
Charge voltage for rechargeable battery
Charge current for rechargeable battery
Battery charger supply voltage 230 V ~ 50 Hz
LPA noise level:
LWA noise level: 81,5 dB(A)
Weight:
Vibration: a
w
20.08.2005 9:13 Uhr
!
Batteries and cordless electric machines and tools
contain materials that are potentially harmful to the
environment. Never place any cordless electric machines
or tools in your household refuse. When cordless electric
machines or tools become defective or worn, remove the
batteries and return them to iSC GmbH (address:
Eschenstrasse 6, D-94405, Germany). If the batteries
cannot be removed, return the complete cordless
machine or tool. You can then be sure that the
equipment will be correctly disposed of by the
manufacturer.
14,4 V =
0-550 rpm
Yes
14,4 V =
2000 mA
72 dB(A)
1,7 kg
< 2.5 m/s 2
Seite 9
GB
iNTERNATiONALES SERViCE CENTER GmbH
9