Technical Specifications - EuroLite SD-200 Mode D'emploi

Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Tank volume:
Dimensions (LxWxH):
Weight:
Fuse:
Please note: Every information is subject to change without prior notice. 17.05.2006 ©
230 V AC, 50 Hz ~
90 W
approx. 1.8 l
480 x 395 x 470 mm
14 kg
T 1 A, 250 V
15/27 51705138_V_1_1.DOC