Selecting A Washing Programme - Brandt VF 320 Série Guide D'utilisation

Loading the dishwasher Présentation de votre lave-vaisselle
The upper basket
This basket is designed in particular to
take: glasses, cups, ramekins, small
salad bowls, bowls, saucers, etc.
You can also place cups, ladles, etc. on
the foldaway brackets as well as a
cutlery basket.
Arrange stemmed glasses along the wire
shelf.
The wire tray enables you to load cutlery of all sizes. You can lay it in
the lower basket or in the upper one by removing the cup supports.
To make loading easier, move the tray to position ➊ and then return it
to position ➋.
Depending on the model: when loading large plates into the lower
basket, you may have to adjust the height of the upper basket. This
can be done even when the basket is full.
① ① Adjusting to the HIGH POSITION:
Gently lift the basket until you hear
the first "Click" on both sides.
② ② Adjusting to the LOW POSITION:
Lift the basket at the back on both sides
("Click") and then gently lower it.
Check that the slides are both at the same height and that the basket is
level.
38
Place glasses,
cups and bowls
facing downwards.

Selecting a washing programme

Présentation de votre lave-vaisselle
Press the "On / Off" button to
switch the machine on.
Refer to the Programmes table
on the following pages to deter-
mine the best programme for the
amount of washing up and how
dirty it is.
Press the button for the pro-
gramme you have selected
The following indicator lights light
up :
"ICS - ", "Soak"
AUTO PROGRAMME
"Intensive", "Eco" or "Fragile",
shows the programme selected.
To change the selection, press a
different programme button.
Check that the power
cable is plugged in the soc-
ket and that the water tap is open.
On / Off
The meaning of the
programme symbols is
shown on the adhesive
label included in your docu-
ments pouch. If you so wish,
you can stick this on the inside
of the dishwasher door.
39