Publicité
Les langues disponibles
Les langues disponibles
English
General assembly instructions
Assembly
1. Take out the vacuum cleaner and the accessories from the packaging.
2. Release both metal clamps [7] and lift the top cover by the handle [2].
3. Verify that the filter [9] and filter enclosure [10] are installed correctly.
4. Close the canister [8] by placing the cover back and closing the metal
clamps [7].
5. Insert the flexible hose [5] short part into the hose connection [4] and turn
counter-clockwise to secure it.
6. Push the metal nozzle [1] onto the hose [5] longer part.
Using the Vacuum Cleaner
1. Place the device on a flat, dry, non-slippery surface.
2. Plug the power cord into a suitable, earthed mains outlet.
3. Press the on/off switch [3] to switch on.
4. Vacuum up the cold ashes.
5. After use, switch off the device and unplug the power cord from the
mains.
6. Let the device cool off to room temperature.
CAUTION:
Never use ash vacuum without the metal nozzle.
4
[5]
[4]
[short]
[1]
[Longer]
Instructions for use
Publicité
