Limits Of Manufacturer Responsibility - Cristec SOLO 12V 200W Manuel D'utilisation

Limits of manufacturer responsibility

CRISTEC cannot control the installation, use and maintenance of the inverter. Thus, we are not responsible for
damages, costs or losses resulting from an installation which is not in accordance with the regulations or
inappropriate use or maintenance.
The customer is always responsible for the use of the inverters CRISTEC.
This device has not been designed and is not warranted for use in life support apparatus or any other critical
device with potential risks of important harm to people or to the environment. We do not accept any
responsibility for any violation of patent rights or other third person rights resulting from the use of the inverter.
CRISTEC keeps the right to modify their products without previous notice.
Remote control for

Functions on remote control are the same as control and indicator on the inverter.
Remote control should be connected with the inverter with the original 5m. CRISTEC
cable or any RJ11/6p 1:1 cable up to max 50m.
Ref. SEEL007130
SOLO1DEH
SOLO 800/1000 & 2000
Page 14 / 30