emerio DH-124928.1 Mode D'emploi page 9

USE
Plug in the appliance. A "beep" sound will be heard. The appliance is on standby mode.
ON/off: Press the standby button to turn on the appliance. The air outlet cover will open automatically. The
panel will show the current humidity. Press the button again, the appliance will be off. The air outlet cover will
close automatically several seconds later.
Humidity setting: press the setting button to set your desired humidity level from 30%-80%. Each press will
increase the humidity by 5% and after 80%, the figure will return to 30% for another circulation. The set humidity
will flash several times in the panel, then environmental humidity will show. Humidity setting is only vaild under
auto mode.
Fan: Press the fan mode button to enter into fan mode. Press the speed button to select low or high fan speed.
The corresponding indicators will be on.
MODE: Press the mode button to select the mode: Auto mode, Low dehumidifying mode, High dehumidifying
mode.
1. Auto mode: In this mode, the auto mode indicator lights up. Both fan speed and humidity can be adjusted
under auto mode. The appliance will automatically maintain the select humidity.
2. Low dehumidifying mode: In this mode, the appliance works with low fan speed for any room humidity and
the humidity cannot be changed. The environmental humidity is shown on the panel.
3. High dehumidifying mode: In this mode, the appliance works with high fan speed for any room humidity and
the humidity cannot be changed. The environmental humidity is shown on the panel.
The mode can be selected to dry clothes: Place the appliance in a room with closed doors along with the
clothes rack.
TIMER:
Auto-OFF setting
When the appliance is ON, press the timer button to select a desired auto-OFF time from 1 to 24 hours.
-
Each press will increase the set time by one hour and after 24 hours, the figure will return to 1 for another
-
circulation. You can also long press the timer button for rapid adjustment.
The timer will flash for several seconds, then the timer indicator light will illuminate still; The panel will
-
show the environmental humidity. The timer setting is confirmed.
The appliance will automatically turn off once the select time has passed.
-
Auto-ON setting
When the appliance is OFF, press the timer button to select a desired auto-ON time from 1 to 24 hours.
-
The way to adjust the timer is the same as that of the auto-OFF setting.
-
You can set your desired working mode at the same time.
-
The appliance will automatically turn on with the set functions once the select time passed.
-
To cancel the timer, set the time to 0 hour; the timer will falsh several times, then the timer indicator light will
turn off.
CHILD LOCK:
Press and hold the button for about 3-5 seconds to lock all the other buttons in the panel.
-
Press and hold the button again for about 3-5 seconds to unlock all the other buttons.
-
- 8 -