Publicité
Les langues disponibles
Les langues disponibles
Hardware Installation
1. Plug the HDMI side of the GWAVRD to an HDMI input
port on your TV.
2. Plug the USB-A male to a USB port on your TV. Some TV
only use the USB port for firmware upgrade only, in this
case you will need a separate wall power adapter (not
included in the kit).
3. Your display screen will now show IOGEARCast splash
screen as below.
4. Go to your device's Wi-Fi network and select the SSID
that appears on the top of your splash screen and input
the password when the network asks you for it.
3
Publicité
