Epson EC-C110 Guide Rapide page 5

5. Close the inner cover and press
about 4 minutes.
Caution: Don't turn off the printer or raise the inner cover while the printer is charging
or you'll waste ink.
6. When you see a completion message on the printer's LCD screen, ink charging is
complete. Press
Installing Software
Note:
■
An Internet connection is required to obtain the product software.
■
To print from a Chromebook™, go to www.epson.com/support/gcp (U.S.) or
www.epson.ca/support/gcp (Canada) for instructions.
■
From a Windows
printer. See page 6 for instructions. To print from a mobile device, see page 9.
Firmware Update Notice: The printer is designed to work only with genuine Epson-
branded cartridges. Other brands of ink cartridges and ink supplies are not compatible and,
even if described as compatible, may not function properly or at all. Epson periodically
provides firmware updates to address issues of security, performance, minor bug fixes and
ensure the printer functions as designed. These updates may affect the functionality of third-
party ink. Non-Epson branded or altered Epson cartridges that functioned prior to a firmware
update may not continue to function.
1. Make sure the printer is not connected to your computer.
Windows: If you see a Found New Hardware screen, click
micro USB cable.
2. Download and run your printer's software package. For the latest software, visit:
www.epson.com/support/ecc110 (U.S.) or www.epson.ca/support/ecc110 (Canada)
3. Follow the instructions on the computer screen to run the setup program.
OK
to return to the home screen.
OK
®
computer, you can also print using the basic driver built into the
to begin charging the ink. Ink charging takes
and disconnect the
Cancel
Getting Started
5