Alto Professional TS2 Série Guide D'utilisation page 22

TS210
(continued)
Connectors
Cabinet
Controls
Protection
Power
Dimensions
(width x depth x height)
Weight
TS212
Output Power
Low Frequency
High Frequency
Crossover
Maximum SPL
Frequency Response
Frequency Range
Coverage
Connectors
Cabinet
Controls
Protection
Power
Dimensions
(width x depth x height)
Weight
22
(2) 1/4" (6.35 mm) TRS or XLR inputs
(1) XLR link output
Trapezoidal, injection-molded, polypropylene enclosure, with
perforated steel grille
Volume, power on/off with LED, clip limiter with LED, ground lift
Electronic clip, thermal and transducer overdrive protection
AC Input: 100–120/220–240 V, 50/60 Hz
Fuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V
12.72" x 12.0" x 20.76"
323 x 305 x 527 mm
21.98 lbs.
9.97 kg
1100 W peak (700 LF + 400 HF)
550 W continuous RMS (350 LF + 200 HF)
12" (305 mm) woofer, 2" (51 mm) voice coil
1" (25 mm) neodymium driver
2 kHz
127 dB peak, 124 dB continuous (dB-SPL @ 1 m)
53 Hz – 20 kHz (+ 3 dB)
46 Hz – 22 kHz (-10 dB)
90° H x 60° V
(2) 1/4" (6.35 mm) TRS or XLR inputs
(1) XLR link output
Trapezoidal, injection-molded, polypropylene enclosure, with
perforated steel grille
Volume, power on/off with LED, clip limiter with LED, ground lift
Electronic clip, thermal and transducer overdrive protection
AC Input: 100–120/220–240 V, 50/60 Hz
Fuse: 100–120 V T6.3AL AC250V / 220–240 V T3.15AL AC250V
14.04" x 13.80" x 23.28"
357 x 351 x 591 mm
28.35 lbs.
12.86 kg