Arktic 233672 Mode D'emploi page 6

Different operation parts
Stainless steel tray
(not included)
Power switch
Preparation before using for the first time
• Remove all protective packaging and wrapping.
• Check for the completeness of the product. In
case of incomplete delivery and damages. Please
contact supplier (See == > Warranty).
• Clean all components as described (See ==>
Cleaning and Maintenance).
EN
Operation
• Connect the power plug to a suitable electrical
power outlet.
• Switch ON the power switch and power indicator
will light up.
• Digital temperature controller (at the front of the
appliance) operation
1) Setting the temperature
- Press SET to enter into the setting mode. The
set temperature is displayed.
- Press or
temperature.
- Press SET again to confirm the setting and exit.
Then, inside cabinet temperature is displayed.
6
to increase or decrease the set
Glass door
• This appliance can have capacity of up to 8 x 1/6
GN stainless steel containers. (Stainless steel
containers not supplied).
Note: Due to manufacturing residues, the appli-
ance may emit a slight odor in the first few cycles.
This is normal and does not indicate any defect or
hazard. Make sure the appliance is well ventilated.
• Leaving the appliance for running some hours to
reach the cooling temperature before placing the
beverage or food inside the appliance.
C
SET
Note:
- If no button is pressed within 10 seconds. The
newly set temperature will be stored.
- The temperature setting range from 2°C to 6°C.
And the cabinet temperature range can be kept
from 0°C to 12°C.
- Keep the door open time as short as possible in
order to keep a cool temperature inside.
Digital controller