Bigben Interactive CD52 Manuel D'utilisation page 9

COMPACT DISC OPERATION
Set the Function Selector to CD position. Insert a CD disc and TOC Information will display.
PLAY/PAUSE button
Press this button at stop mode, system will go to Play mode.
z
Press this button at play mode, system will go to Pause mode.
z
Press this button at pause mode, system will resume to Play mode.
z
STOP button
In Play or Pause mode, system changes to Stop mode
z
In Program Entry mode, system exit Program Entry mode.
z
In Random Play mode, system changes to Stop mode and release Random function.
z
SKIP UP button
Change the starting play track during Stop mode, cyclic to the first track if it is in the last track.
z
Skip to next track during Normal play, cyclic to the first track if it is at last track.
z
Press the key for 2 sec, Fast-Forward will execute.
z
Skip to next programmed track during Program play, cyclic to the first programmed track.
z
SKIP DOWN button
Change the starting play track during Stop mode, cyclic to the last track if it is at the first track.
z
Skip to previous track during Normal play, cyclic to the last track if it is at the first track.
z
Press the key for 2 sec, Fast-Rewind will execute.
z
Skip to previous programmed track during Program play, cyclic to the first programmed track.
z
REPEAT Play
x
2 Selective modes: Repeat and Repeat All.
x
During Repeat mode, the system repeats current track on CD.
x
During Repeat All mode, the system repeats all tracks on CD; when it reaches end of final track, it will return
to the first track.
PROGRAM Play
Program entry available during Stop mode only. Pls. follow instruction below:
By pressing [PROG] button, system displays PROG and track number flashes.
1.
By pressing [ SKIP UP] / [
2.
Press [PROG] again to confirm, the system keeps that track number and goes to next program mode.
3.
The system can hold 20 CD programs. After the system registered with maximum programs, no further entry
4.
allowed.
If [STOP] button is pressed during program entry mode, the system removes earlier (Programmed) contents
5.
and returns to stop mode.
If [PLAY/PAUSE] button is pressed when the system holds program content, it starts program play and the
6.
display shows PROG.
If [ SKIP UP] / [ SKIP DOWN] button is pressed during the program play, the system skips to next /
7.
previous programmed track.
If [STOP] button is pressed during Program play, the system stops playing but keeps the program contents.
8.
Until [STOP] key is pressed again, the system removes program content and goes to Stop mode.
SKIP DOWN] button, you can choose desired track number to program.
4