Sony MEX-M70BT Mode D'emploi page 28

Some functions do not work.
 Check if the connecting device supports the
functions in question.
A call is answered unintentionally.
 The connecting phone is set to answer a call
automatically.
Pairing failed due to time out.
 Depending on the connecting device, the time
limit for pairing may be short.
 Try completing the pairing within the time.
BLUETOOTH function cannot operate.
 Turn off the unit by pressing OFF for more than 2
seconds, then turn the unit on again.
No sound is output from the boat speakers
during handsfree call.
 If the sound is output from the cellular phone, set
the cellular phone to output the sound from the
boat speakers.
Pandora® connection is not possible.
 Shut down the Pandora® application on the
mobile device, and then launch again.
Application name is mismatched with the actual
application in App Remote.
 Launch the application again from the "App
Remote" application.
While running the "App Remote" application via
BLUETOOTH, the display automatically switches
to [BT AUDIO].
 The "App Remote" application or BLUETOOTH
function has failed.
 Run the application again.
Error displays/Messages
ERROR
 The disc is dirty or inserted upside down.
 Clean or insert the disc correctly.
 A blank disc has been inserted.
 The disc cannot play due to a problem.
 Insert another disc.
 USB device was not automatically recognized.
 Connect it again.
 Press  to remove the disc.
HUB NO SUPRT (hubs not supported)
 USB hub is not supported on this unit.
IPD STOP (iPod stop)
 When repeat play is not set, playback of the last
track in album finished.
The music application in the iPod/iPhone is
terminated.
 Press PAUSE to start playback again.
28
GB
NO DEV (no device)
 [USB] is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
 Be sure to connect a USB device and USB cable.
NO MUSIC
 The disc or USB device does not contain a music
file.
 Insert a music CD.
 Connect a USB device with a music file in it.
OVERLOAD
 USB device is overloaded.
 Disconnect the USB device, then change the
source by pressing SRC.
 The USB device has a fault, or an unsupported
device is connected.
PUSH EJT (push eject)
 The disc cannot be ejected.
 Press  (eject).
READ
 The unit is reading all track and album
information on the disc.
 Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
USB NO SUPRT (USB not supported)
 The connected USB device is not supported.
 For details on the compatibility of your USB
device, visit the support site.
[ ] or [
 During reverse or fast-forward, you have reached
the beginning or the end of the disc and you
cannot go any further.
[ ]
 The character cannot be displayed.
For BLUETOOTH function:
BT BUSY (BLUETOOTH busy)
 The phonebook and the call history of the cellular
phone are not accessible from this unit.
 Wait for a while, and then try again.
ERROR
 BT Initialize failed.
 Phonebook access failed.
 Phonebook content was changed while
accessing the cellular phone.
 Access the phonebook in the cellular phone
again.
]