Vérification De La Somme De Contrôle - Inateck BCST-60 Manuel D'instruction

3.15.2. Vérification de la somme de Contrôle
Checksum character is not enforced to be included in the data of China Postal Code. If
checksum character is included, it should be the last character of the barcode data. As a
calculate value based on all of the data, Checksum character is used to check whether the
data is correct or not.
If the scanner is set to "Do Not Verify", which is the default, then the scanner will read all
the barcode data.
If the scanner is set to "Verify with Output Checksum Character", and the scanner will
check the data based on the last character of the barcode data. If the check passes, the
scanner will read and output the Checksum Character as the last character of normal
data; However the scanner will not be able to read China Postal Code without checksum
character under this setting.
If the scanner is set to "Verify without Output Checksum Character", and the scanner will
check the data based on the last character of the barcode data. If the check passes,the
scanner will read but will NOT output the Checksum Character; However the scanner will
not be able to read China Postal Code without checksum character under this setting.
(*) Ne pas vérifier Vérifier avec sortie du caractère de la
somme de contrôle
Vérifier sans sortie du caractère de la Entrez les Configurations
somme de contrôle
Quitter avec enregistrement Quitter sans enregistrement
Les étapes pour "Vérifier avec sortie du caractère de la somme de contrôle" sont les
suivantes :
1. Scannez le code-barres "Entrer les Configurations" ;
2. Scannez le code-barres "Vérifier avec sortie du caractère de la somme de contrôle" ;
3. Scannez le code-barres "Quitter avec enregistrement".
72