Connecting Sensors; Hda 5500 With One Transmitter And Pt 100 Sensor - Hydac HDA 5500-3-1-AC-000 Notice D'utilisation

HDA 5500
Menu point Setting
Allocation of analogue output to sensor (ouT.S)
Output signal (ouT.M)
Software version (VErS)
Display of the software version (for reference only)
To close basic settings (End)

8 Connecting sensors

One analogue input for a transmitter or sensor is always available as standard. The particular
types of HDA 5500 described here have a further Pt 100 input.

8.1 HDA 5500 with one transmitter and Pt 100 sensor

Connection example for one transmitters (sensors) with a 4..20 mA sink as input signal and
one Pt 100 sensor, e. g. HDA 5500-3-2-DC-000 with HDA 4746-A-100-000 and TFP 100
(refer to chapter 16 Pin connections):
HDA 4746-A-...
TFP 100
Analogue output allocated to sensor 1
Analogue output allocated to Pt100 sensor
4..20 mA output signal
0..10 V output signal
Basis settings menu closes.
Changed settings are saved.
Basic settings can still be altered.
1
2
3
4
1
2
3
4
User Manual
Setting range Default setting
SEn.1 SEn.1
SEn.2
MA VoLT
VoLT
YES no
no
HDA 5500-...
6
+12V
7
IN1
8
Pt 100
9
Pt 100
Input signal
10
sensor 1:
Pt 100
11
Pt 100
- 11 -