Bestron ABC1300S Mode D'emploi page 24

cleAninG And MAintenAnce - cleaning
1. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure no
moisture gets into the appliance.
2. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
cleAninG And MAintenAnce - changing the dust bag
1. Change the dust bag immediately once the 'dust bag full' indicator turns
red, see Figure 10.
It is possible that the indicator turns red whilst the dust bag is not yet full.
if so, then the nozzle, hose or tubes may be blocked. These will then
need to be cleaned.
2. Open the cover by pulling the cover release (dust bag) upwards.
Remove the dust bag from the holder, and dispose of it in a dustbin.
3. Fit a new dust bag in the holder with the arrow pointing downwards,
and press into position.
4. Close the cover, and press until it clicks into place.
Make sure that the dust bag does not become pinched by the cover. This
could damage the appliance and/or the dust bag.
Note Dust bags for this vacuum cleaner are available from every major hardware store.
cleAninG And MAintenAnce - cleaning or replacing the motor safety filter
Clean or replace the motor safety filter at least twice a year, and more frequently if the filter is visibly
blocked.
1. Remove the plug from the wall socket.
2. Remove the hose from the vacuum cleaner.
3. Open the cover by pulling the cover release (dust bag) upwards.
Remove the dust bag, see Figure 10. Remove the motor safety filter
holder, located behind the dust bag: see Figure 11.
4. Dispose of the filter, or wash it in lukewarm water. Allow it to dry
thoroughly.
5. Return the cleaned or new filter to its holder, and fit the holder in the
appliance. Fit a dust bag. Close the cover, and press until it clicks into
place.
• Water could penetrate into the appliance if the filter is not thoroughly
dry. This could result in (electrical) damage.
• Make sure that the dust bag does not become pinched by the cover.
This could damage the appliance and/or the dust bag.
cleAninG And MAintenAnce - replacing the exhaust filter
Replace the exhaust filter at least twice a year, and more frequently
if the filter is visibly blocked.
1. Remove the plug from the wall socket.
2. Open the exhaust-filter cover by pulling on the lip on the cover.
Remove the exhaust filter from the appliance, see Figure 11.
3. Rinse the filter in lukewarm water. Allow it to dry thoroughly.
4. Return the cleaned filter to the appliance. Close the cover, and
press until it clicks into place.
24
user's instructions
Figure 10
Figure 11
Figure 12