Publicité
Les langues disponibles
Les langues disponibles
operAtion - General
The appliance is intended only for domestic use, not
for professional use.
1. Tube
2. Hose
3. Hose connector
4. Hose grip
5. Mechanic suction pressure control at the handle
6. Combi nozzle
7. Motor unit
8. Cover
9. Cover release button (dust bag)
10. Vacuum-cleaner handle
11. Rear wheels
12. Swivelling front wheel
13. Cord-rewind button
14. On/Off switch
15. Indicator, "dust bag full"
16. Crevice tool/dusting brush
17. Exhaust filter
18. Storage bracket
operAtion - before use for the first time
1. Verify that a dust bag is fitted. Fit a dust bag, if necessary. See 'Changing the dust bag'.
operAtion - use
1. C lick the hose connector into the hose opening on
the motor unit. To remove the hose, press on the
two release buttons on the side of the connector
and pull the connector from the opening; see
Figure 2.
2. Slide the tubes onto the hose handle
3. P ress the button on the tubes and keep it
pressed in; you can then extend or retract the
tubes to the required length. See Figure 3.
4. P ress the foot button on the nozzle to set the
combi nozzle for use on hard orsoft surfaces,
see Figure 3b. For use on hard surfaces, press
the foot button on the combi nozzle to extend
the brushes. Lift the button for use on soft
surfaces.
12
18
7
14
10
15
8
13
18
17
11
3a
22
user's instructions
4
5
16
2
1
3
9
6
3b
3c
3d
Publicité
