BST UPA-120TU Manuel D'utilisation page 9

A. AM/FM SELECTOR
Press this key to select AM or FM
B. MP3 BUTTON
Press this key to select Mp3 player.
C. MEMORY BUTTON
Press the memory key, Then press the PRESET key from M1 to M5, LCD displays frequency and saving code,
D. USB/SD BUTTON
Press this key to select the SD Card or USB player.
E. REP BUTTON
Press this key to select repeat mode : repeat one , repeat all , random
F. EQ BUTTON
It can adjust panorama mode, such as classic , pop, rock, jazz, flat parameter setting
G. USB SOCKET
Insert USB player ( not bigger than 8Go )
H. DISPLAY
I. SD SOCKET
Insert SD/MMC card ( not bigger than 8Go )
J. I<< BUTTON
Play the last program, in the radio model, It attenuates the band
K. VOL - BUTTON
Press this key the sound level is attenuated.
L. PLAY / PAUSE BUTTON
Press this key it start to play
M. <<I BUTTON
Play the next program, In the radio model, It increase the band
N. VOL + BUTTON
Press this key the sound level is increased.
O. STOP / ON-OFF BUTTON
Press this key it switches the power or stop the program
SPEAKERS CONNEXION
On the 4-16 Ohms output, you can connect several speakers.
Note : The total impedance of the speakers must to be from 4 to 16 Ohms. ( Two speakers in parallel = impedance divide by 2 ), Two speakers
in serie = impedance x2 )
Connect the 4-16 Ohms output of the power amplifier + socket of the speaker
Connect the com socket of the power amplifier on the – socket of the speaker
On the 70V output, you can connect several PA speakers.
© Copyright LOTRONIC 2018
UPA-120TU / UPA-240TU
.
Page 9