Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
12. Control panel
KEYS AND LEDS
1
AUXILIARY
2
DEFROSTING
3
ON/STAND-BY
4
DOWN
5
SET
6
UP
7
ON/STAND-BY LED
MULTIFUNCTION
8
LED LIGHT
9
CELL LIGHT LED
EVAPORATOR
10
FAN LED LIGHT
11
DEFROST LED
COMPRESSOR
12
LED LIGHT
ALARM'S LED
13
MAINTENANCE
14
LED
FAHRENHEIT
15
GRADE LED
CELSIUS GRADE
16
LED
14
Switching ON/OFF of internal lighting, if available.
Press and release the AUXILIARY key : the LED light will switch on/off.
Press and hold down the DEFROSTING key for 4 sec.
If pre-set prerequisites are not met, no defrosting
Press and hold down the ON/STAND-BY key for 2 sec: the on/stand-by
LED will switch off/on
Scrolls through the Menu items Decreases the values
Allows to change the work set
Scrolls through the menu items Increases the values
on/stand-by LED
if on, the instrument is in stand-by mode
• the auxiliary output has been manually switched on
• the door resistors will be switched on
If it is on, the cell light has been switched on manually
If it is on, the evaporator fan is on
If it is flashing, the evaporator fan is disactivated
If it is on:
• defrosting is in progress
If it is flashing:
• defrosting required but a compresser protection operation is in
progress
• dripping in progress
compressor LED light if the LED is on, then the compressor is on if the
LED is flashing:
• the working setpoint is in the process of being changed
• compressor protection operation in progress
Alarms LED if on, an alarm or error is in progress
Maintenance LED if on, compressor maintenance is required
Fahrenheit grade LED if on, the temperatures will be displayed using
the Fahrenheit grade unit of measurement
Celsius grade LED if on, the temperatures will be displayed using the
Celsius grade unit of measurement
Publicité
Table des Matières
