TP-Link 7106507759 Guide D'installation page 6

English
Option 2: Via WPS Tool
If your adapter does not have a WPS button, please ignore this option.
A. Press the WPS button on your router.
B. Within 2 minutes, press and hold the WPS button on
the adapter until WPS Tool opens.
WPS
Cancel
WPS
Cancel
C. When the "Success!" message appears, your
computer is connected to Wi-Fi.
For Mac OS X
Option 1: Via TP-Link Utility
A. Click (TP-Link Utility) on the menu bar or select
Site Survey tab of the pop-up utility window.
B. Select your Wi-Fi network and enter the Wi-Fi
password when prompted.
4
Fri 5:14 PM
USB-WiFi: On
Turn USB-WiFi Off
TP-Link_XXXX
TP-Link_0903
TP-Link_ 0210
TP-Link_0001
Join Other Network
WPS
Open Wireless Utility
Option 2: Via Wi-Fi Protected Setup (WPS)
If your adapter does not have a WPS button, please ignore this option.
A. Press the WPS button on your router.
B. Within 2 minutes, press and hold the WPS button on
the adapter until the following window appears.
WPS
WPS Progress： Scan Active WPS AP
PIN PBC
C. When you are prompted "WPS Protocol Finished"
or "PBC - Get WPS profi le successfully",
it's complete.
For detailed instructions, please refer to the User Manual from
this product's Support page at www.tp-link.com.
Wireless Utility
Profile Link Status Site Survey Statistics
WPS
AP List
SSID BSSID Signal Channel Authe...
TP-Link_XXXX 72 - 10 -18 - 01 - 00 - 03 5 6 WPA2- PS
TP-Link_TEST_ 02 - 10 -18 - 01 - 00 - 02 2 36 WPA2- PS
TP-Link_0903 00 - 51 - E1 - 02 - 20 - 44 7 11 Open
TP-Link_0001 00 - 10 -18 - A9 - 5D - 8D 29 2 Open
Disconnected!!
RESCAN CONNECT
Cancel
About
Encr... Network Type
AES Infrastructure
AES Infrastructure
NONE Infrastructure
NONE Infrastructure
ADD PROFILE