Marantz professional PMD-750 Guide D'utilisation page 5

Features
Transmitter
Bottom Panel
1. Battery Compartment: Insert (2) AA batteries here (not
included). Alkaline batteries are recommended; always replace
both batteries. Do not mix battery types.
Front Panel
1. Display: The display will show the
channel that the unit is communicating
on, pairing status, and battery level
meter.
2. Pair LED: The LED will blink red when
the transmitter is muted. The LED will
blink blue when it is searching to pair to
the receiver. The LED will be lit solid blue
when it is paired to the receiver.
3. Navigation
buttons to change which sections of the
display are highlighted.
4. Enter Button: Press this button to
navigate to a menu/submenu selection or
confirm a specific function.
2
5. Mic Input: Connect the included mini-
XLR lavalier condenser microphone here.
Side Panel 5
1. Micro USB Port: Connect a USB
power adapter (sold separately) here to
power the unit if not using 2 AA
batteries.
2. Power On/Off: Press and hold this
button to power the unit on/off.
3. Belt Clip: Attach this clip to secure to a
belt loop or pocket.
Buttons: Press
1
2
5
these
3
4
2
1
3
1
4
1
3
2
5