Marantz professional PMD-750 Guide D'utilisation page 6

Receiver
Bottom Panel
1. Battery Compartment: Insert (2) AA batteries here (not
included), and make sure the positive (+) and negative (–) poles
are facing the proper directions. Alkaline batteries are
recommended. Always replace both batteries, and do not mix
battery types.
Front Panel
1. Display: The display will show the channel that
the unit is communicating on, pairing status,
and battery level meter.
2. Pair LED: The LED will be lit solid red when
unpaired from the transmitter. The LED will be lit
solid blue when it is paired to the transmitter.
3. Navigation Buttons: Press these buttons to
change which sections of the display are
highlighted.
4. Enter Button: Press this button to navigate to a
menu/submenu selection or confirm a specific
function. Quickly press and release this button
to change TX1 and TX2 pages on the main
menu.
5. Hot Shoe Adapter Mount: Attach this to the
hot shoe mount of a DSLR camera.
2
1
Right Side Panel
1. Micro USB Port: Connect a USB power
adapter (sold separately) here to power the unit
if not using 2 AA batteries.
2. Power On Button: Press and hold this button
to power the unit on/off.
Left Side Panel
1. Audio Output: Using the included mini-XLR
cable, connect
microphone input of a DSLR camera.
2
1
6
3
4
this audio output
3
4
1
1
to the
2
1
5
3
2
2
1
2
1
3
4
1
1