HDS Technology SERENE TV Direct TV-100 Guide D'utilisation page 10

USINg ThE RECEIvER FOR dIRECT AUdIO INPUT
1. You may connect a TV-Direct receiver directly
to a MP3 music player.
2. Turn off the power on the receiver unit. Plug
the audio cable directly into the input jack of
the receiver as shown.
(Note: This application does not use any bat-
tery power. Audio input signals travel
directly from the MP3 or other audio
source to the ear buds)
3. Connect the other end of the audio cable
to any audio source output (MP3, airplane
entertainment system).
4. Adjust volume control on your MP3 or the
airplane entertainment system. (Note: The
Volume and the Tone controls have no effect
on this input jack)