Sportec seca 869 Mode D'emploi Et Garantie page 20

Switching the weight display
The weight display can be switched between kilogrammes (kg) and pounds (lb) or
between pounds (lb) and stones (st).
– Switch on the scale using the start key.
Weight is initially displayed in the last
setting selected.
– To switch the weight display between
kilogrammes and pounds, press the kg/
lbs/sts key.
– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
The lbs or sts display lights up.
Automatic switch-off/economy mode
The scale automatically detects whether it is being operated on rechargeable/non-
chargeable batteries or whether it is connected to the mains.
– Operation on rechargeable/non-chargeable batteries: automatic shut-down after 20
seconds.
– With mains operation: shut-down only via keypad.
Taring weight display (TARE)
The tare function is very useful, for example for determining the weight of a child or an
object placed on the scale in addition to yourself.
Proceed as follows:
– Press the start key with no load on the
scale.
– First stand on the scales yourself with-
out the additional weight and activate
the Tare function by depressing and
holding the hold/tare key.
The display is reset to zero,
in the display until weight is detected to
be stable. Only then is the Tare function
fully activated. The note "NET" appears.
– Now take the additional load onto the
scale. You can leave the scale to do so,
in which case
----
The scale determines the weight of the
additional load.
You can now perform as many weigh-
ing operations as you like.
Model 869
flashes
0. 0
appears.
19