Sportec seca 869 Mode D'emploi Et Garantie page 16

3. Before you start...
Remove the packaging and place the scale on a firm, level surface.
The scope of supply includes:
• Weighing platform
• Display head plus connecting cable
• Wall bracket
• 2 Screws
• 2 Rawlplugs
• 6 mignon-type AA 1.5 V batteries
Desk-top stand
If you prefer, you can stand the display part
rather than hang it on the wall:
Alter the angle of the display part to enable
the display to be read most easily.
Fitting the wall bracket
The display part is intended for mounting on the wall. Use the mounting material supplied
to do so.
– Screw the wall bracket to the wall as
shown.
Be aware that you have a length of only
2.25 m of cable between the scale and
the display part.
The cable may not contact the weighing
platform during weighing, as this might
falsify the result.
Model 869 15