Midi Data Format - Yamaha P50-m Mode D'emploi

MIDI Data Format

1. Channel voice messages
1.1 Note Off
1000nnnn 8n Status
0kkkkkkk kk
Note No.
0vvvvvvv vv
Velocity
Velocity is not received.
Not received when the Part Parameter setting Rcv NOTE
MESSAGE = OFF.
1.2 Note On / Note Off
1001nnnn 9n
Status
0kkkkkkk kk
Note No.
0vvvvvvv vv
Velocity
Velocity is received only for Note On.
Not received when the Part Parameter setting Rcv NOTE
MESSAGE = OFF.
1.3 Polyphonic Aftertouch
1010nnnn An
Status
0kkkkkkk kk
Note No.
0vvvvvvv vv
Value
With the default settings, has no function.
Polyphonic Aftertouch is not received when the Part
Parameter setting Rcv POLYPHONIC AFTER TOUCH =
OFF.
The effect will apply only to the range of note numbers
36~97.
1.4 Control Changes
1011nnnn Bn
Status
0ccccccc cc
Control No.
The range of possible values for
"c" is described in section 1.4.1
and following.
0vvvvvvv vv Control Value v=0~127
Control Changes are not received when the Part Parameter
setting Rcv CONTROL CHANGE = OFF.
1.4.1 Bank Select
Cntrl No. parameter
0 Bank Select MSB
32 Bank Select LSB
Bank Select messages are not received when PROGRAM
CHANGE TABLE = OFF, and Rcv BANK SELECT = OFF.
Bank Select processing is suspended until a Program
Change message is received.
1.4.2 Modulation
Cntrl No. parameter
1 Modulation
Modulation is not received if the Part Parameter setting Rcv
MODULATION = OFF.
1.4.3 Portamento Time
Cntrl No. parameter
5 Portamento Time
1.4.9 When Portamento = ON, this adjusts the speed of the
pitch change.
A value of 0 is the shortest portamento time, and 127 is the
longest portamento time.
1.4.4
n=channel number
k=0 (C-2)~127 (G8)
v=0~127
1.4.5
n= channel number
k=0 (C-2)~127 (G8)
v=0: Note off,
1.4.6
v=1~127: Note on
n= channel number
1.4.7
k=0 (C-2)~127 (G8)
v=0~127
1.4.8 Hold1
n= channel number
1.4.9
1.4.10 Sostenuto
Data Range
0:Normal, 1~127:Silent
0~127
1.4.11 Soft Pedal
Data Range
0~127
1.4.12 Harmonic Content
Data Range
0~127
SOUND LISTS & MIDI DATA
Data Entry
Cntrl No. parameter
6 Data Entry MSB
38 Data Entry LSB
Used to set the value of the parameter specified by RPN and
NRPN.
Main Volume
Cntrl No. parameter
7 Main Volume
Volume is not received when the Part Parameter setting Rcv
VOLUME = OFF.
Pan
Cntrl No. parameter
10 Pan
0 is left, 127 is right.
Pan is not received when the Part Parameter setting Rcv
PAN = OFF.
Expression
Cntrl No. parameter
11 Expression
Expression is not received when the Part Parameter setting
Rcv EXPRESSION = OFF.
Cntrl No. parameter
64 Hold1
Hold1 is not received when the Part Parameter setting Rcv
HOLD1 = OFF.
Portamento
Cntrl No. parameter
65 Portamento
Portamento is not received when the Part Parameter setting
Rcv PORTAMENTO = OFF.
Cntrl No. parameter
66 Sostenuto
Sostenuto is not received when the Part Parameter setting
Rcv SOSTENUTO = OFF.
Cntrl No. parameter
67 Soft Pedal
Soft Pedal is not received when the Part Parameter setting
Rcv SOFT PEDAL= OFF.
Cntrl No. parameter
71 Harmonic Content 0~127 (0:-64, 64:+0, 127:+63)
This parameter adjusts the resonance specified by the voice.
Since it is a relative change parameter, it produces a boost or
cut relative to a mid-point of 64. Higher values will produce a
more distinctive sound.
Depending on the voice, the effective range of this parameter
may be narrower than the range that can be set.
Data Range
0~127
0~127
Data Range
0~127
Data Range
0~127
Data Range
0~127
Data Range
0~127 (0-63:off, 64-127:on)
Data Range
0~127 (0-63:off, 64-127:on)
Data Range
0~127 (0-63:off, 64-127:on)
Data Range
0~127 (0-63:off, 64-127:on)
Data Range
33