SOLAC MD7410 Mode D'emploi page 11

is serviced only by specialist
personnel, and that only original
spare parts or accessories are
used to replace existing parts/
accessories.
CAUTION: There is a risk of fire
•
if the appliance's cleaning is not
done according to these instruc-
tions.
Any misuse or failure to follow the
•
instructions for use renders the
guarantee and the manufactur-
er's liability null and void.
DESCRIPTION
A Heating tube
B Pressing plate
C Handle
D On/off switch
E Cold stand
F Electrical cord
G ON pilot light
E Curling accesory
If the model of your appliance
•
does not have the accessories
described above, they can also
be bought separately from the
Technical Assistance Service.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all products' pack-
•
aging has been removed.
USE:
Unroll the cable completely be-
•
fore plugging it in.
Connect the appliance to the
•
mains.
Turn the appliance on, by using
•
the on/off switch.
The pilot light (G) comes on.
•
Prepare a strand of hair. (Fig.1).
•
Simply roll the strand of hair
•
around the tube and keep press-
ing for 5 seconds with the help of
the pressing plate. (Fig.2).
After 5 seconds, unroll it carefully.
•
Repeat the process with the rest
•
of the hair.
ONCE YOU HAVE FINISHED
USING THE APPLIANCE:
Turn the appliance off, using the
•
on/off switch.
Unplug the appliance from the
•
mains.
CLEANING
Disconnect the appliance from
•
the mains and allow it to cool
before undertaking any cleaning
task.
Clean the equipment with a damp
•
cloth with a few drops of wash-
ing-up liquid and then dry.
Do not use solvents, or products
•
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
Never submerge the appliance in
•
water or any other liquid or place
it under running water.
If the appliance is not in good
•
EN