PLYMOVENT MINIMAN-160 TOP GRADE Manuel Opérateur page 7

MM-160-TG MM-160-TG
Ø13mm
3. adjust the friction joints to desired tension.
a
051113/0 MiniMan-160/TG
MoUnTinG insTrUcTion
© Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced,
handed over, copied, xeroxed or translated into another language in any form or means without written
permission from Plymovent AB. Plymovent AB reserves the right to make design changes.
2. fit the wall bracket / extraction arm directly against the
wall or on stanchion Pa-110-TG or Pa-220-TG. if the
bracket is fitted directly to the wall, make sure that the
structure of the wall is strong enough.
b
c
c
4. connect the duct system.
date: 05-10-04
Product no:
MM-160-TG
MM-160-TG/enG/3/6
EN - 6