Horizont insect-o-kill 30plus Notice D'utilisation page 7

Hang the unit from the tabs using metal chain or cord which is capable of
with standing 5 times the unit's weight (see
the unit's serial label for weight).
Free standing
The unit has integral feet for free standing stability. Stand the unit on shel-
ves, table tabs, work surfaces and other similar positions.
Note: Ensure the unit can be switched off and isolated by disconnection for
cleaning and maintenance.
5.Connection to electric power supply
Please observe the following instructions:
• Check the required input voltage on the product label is correct for your
supply.
• Connect the unit to the power source by the cable and plug provided.
• Connection to the EFK must be made using a cable type H05RN-F. The
cable supplied is of this type.
• Connect the cable to the power source ensuring that the correct code is
strictly followed:
Live
Black or brown
6.Routine maintenance
The only maintenance is to keep the unit clean as follow:
• Cleaning once a week or if required.
• Always switch off and disconnect from the power source before handling.
• Empty dead insects from the catch tray.
• Clean the catch tray and unit with a cloth dampened with warm water
and soap.
• When necessery, clean killing grille with a nylon scourer. Do not use steel
wool.
Be careful not to bend grille.
Once connected, the cable should be mechanically secured.
For suspended mode the cable should be secured to a suspension cord or
chain.
For wall mounted mode, secure the cable to the wall using cable clips.
insect-o-kill 30plus / 40plus
Earth
Green oder
green/yellow
Neutral
White or blue
7