Cleaning & Storage; Warranty And Support; Recycling - Philips Lumea Mode D'emploi

26 26 English
Cleaning & storage

Warranty and support

Recycling

3 After charging, remove the adapter from the wall socket and pull the
small plug out of the device.
Note:The battery functionality is not enough for a full body treatment.
1 After use, switch off the device, unplug it and let it cool down.
Note: Light exit window and the attachment can become very hot after
usage.
2 Remove the attachment.
3 Moisten the soft cloth supplied with the device with a few drops of water
and use it to clean the following parts:
-
the light exit window on the device
-
the outside surface of the attachments
-
the reflector inside the attachments
-
the transparent filter glass in the bikini and the precision attachment
-
the reddish filter glass inside the facial attachment
-
the skin tone sensor window
4 Let all parts air dry thoroughly.
5 Store the device in a dust-free place at a temperature between -25° to
+70°C and a humidity range between 15-90%.
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
-
This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).