Fan Speed Control; Anti-Dust Fan Setting - Clevo X170SM-G Guide Utilisateur

Fan Speed Control

You can set the fan speed to Maximum (full power), Automatic/
Slient or Custom. The fan speed will adjust itself automatically to
control the heat of the CPU/GPU. You can use the Offset slider to
adjust the settings to your preference. However you can adjust the
1
setting to Maximum if you prefer.
The Custom setting allows you to click and drag on any of the 2 mid-
range nodes on the graph in order to adjust the temperature parame-
ters of the CPU Fan or GPU Fan. All these settings can be
overidden by the system, as a safety precaution, if it requires
heavier use of the fan.

Anti-Dust Fan Setting

This system features an anti-dust fan, which runs alternately clock-
wise and counter-clockwise, in order to eliminate dust from building
up inside the computer. You can run the fan immediately, and adjust
the schedule for when to run the fan, by clicking Anti-Dust Fan Set-
ting in the Fan Speed Setting control panel and then clicking the
1
appropriate controls.
Figure 8 - Fan Speed Control/Anti-Dust Fan
Setting
15