Domo DO9024WK Mode D'emploi page 28

DO9024WK
PARTS
1. lid
2. spout
3. Release button
for lid
4. start button
5. handle
6. indicator
7. voltage selection
8. 2 cups
travel bag included
bEFORE THE FIRST USE
First remove any loose objects that are inside the water kettle.
When using the water kettle for the first time, it is recommended to clean the kettle
first. Fill the water kettle with water twice and pour out the water. Wipe the outside of
the kettle clean with a damp cloth.
the maximum content of the water kettle is 0.5l (indicated with MaX).
the minimum content of the water kettle is 0.2l (indicated with MiN).
USING THE WATER kETTLE
1. Slide the release button of the lid backwards, open the lid and fill the water kettle
with water. Make sure that the water kettle is filled in between the minimum 0.2l
and maximum 0.5l indications. if there is not enough water in the kettle, the kettle
will switch itself off before the water boils. Caution: if there is too much water
in the kettle (if the water exceeds the maximum indication of 0.5l), boiling
water may spray out of the spout during boiling! that is why you should also
make sure that the lid is well closed.
2. Plug in the appliance and press the start button. the indicator will light up
and the water will start heating up. when the water boils, the water kettle will
automatically shut off.
3. Make sure that there is no obstruction blocking the button and that the lid is
properly closed. if not, the water kettle will not shut off automatically. carefully
pour out the water. be sure to avoid contact with the hot steam.
3 1
2
6
28
4
5
8
7