Honda Power Products F220 Manuel De L'utilisateur page 28

Handle angle adjustment (GET type)
The handle can be adjusted at three different angles in either direction.
To adjust, loosen the handle angle adjuster and turn the handle column
to the required position. After adjustment, tighten the adjuster
securely.
HANDLE ANGLE ADJUSTER
Normal operating angle
Lower the handle slightly so the front of the machine is raised about
6~8°.
To get the maximum advantage from the tiller, try to hold the machine
at the angle shown while you are tilling the ground:
HORIZONTAL
LINE
6~8°
ATTACHMENT LINE OF ENGINE
25