Publicité
Les langues disponibles
Les langues disponibles
CONNECTION
Audio Cable
IDE Interface cable
÷ Switch off the power supply of the personal computer.
÷ Connect the power supply cable from the personal computer. At the time of
connection, please pay attention to the cable polarity.
÷ Connect the IDE interface cable. At this time, confirm that the pin 1 of the IDE
connector is connected correctly to pin 1 of the cable.
÷ When a sound board is used, connect the audio output with an audio cable to the
sound board.
WARNING
The power supply of the personal computer always must be switched
off before cables are connected.
WARNING
Be sure to supply electrical power for this product from the personal
computer which is connected to it. Do not use any other power supply
than the internal one of the personal computer.
10
<DRC1074>
En
Pin 1
Power cable
Fig. 4
Publicité
