Storage; Maintenance And Care - Tornado CV 38/1 Mode D'emploi

Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Maintenance and care

Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
Maintenance intervals
Daily
 Clean the brush roller.
Weekly
 Check the wear of the brush roller.
Note: The degree of the wear is shown by
a comparison with the indicator bundle of a
different colour. When the black bristles are
at the same height as the red ones, replace
the brush roller.
Cleaning the brush roller
 Dismount the brush cover if necessary:
Turn the turn-lock fasteners by 90° and
remove the brush cover.
 Cut hair and threads that have got
wound on the brush roller using a pair of
scissors or just remove them.
10

Storage

Replacing the filter bag
 Unlock and remove the filter cover.
Illustration
 Turn the locking mechanism of the filter
bag towards the right. Close, remove,
and dispose of the filter bag.
Illustration
 Insert a new filter bag and turn the lock-
ing mechanism of the filter bag towards
the left.
 Insert and lock filter cover.
Replace exhaust filter
 Unlock and remove the filter cover.
 Push the locking mechanism of the filter
casing upwards and remove the filter
casing.
 Remove the exhaust filter from the filter
housing.
 Insert new exhaust filter into filter hous-
ing.
 Insert and click the filter housing into its
place.
 Insert and lock filter cover.
Replace motor protection filter
 Unlock and remove the filter cover.
 Push the locking mechanism of the mo-
tor protection filter upwards. Remove
and dispose of the motor protection fil-
ter.
 Install and lock the new motor protec-
tion filter.
 Insert and lock filter cover.
Replacing the brush roller
 Dismount the side part by means of a
coin.
 Pull out the brush roller and dispose of.
 Insert a new brush roller.
 Reinstall side part.
– 3
EN