Jula MEEC TOOLS 008804 Mode D'emploi page 33

the clamp's surfaces.
• Do not use loose reduction rings or similar
to reduce the size of the holes in circular
saw blades.
• Make sure that the fixed reduction rings
are the same diameter as the tool they
are secured with, and at least 1/3 of the
average diameter.
• Check that fixed reduction rings are
parallel with each other.
• Handle insertion tools with care. These
are best stored in their original packaging
or in special containers. Wear safety
gloves to improve your grip and further
reduce the risk of damage.
• Check that all safety devices are properly
secured by using tool inserts.
• Make sure that the tool setting you are
using corresponds to the power tool's
technical requirements and is properly
secured.
• Only use the supplied blade for sawing
wood, never for working on metal.
REDUCTION OF NOISE AND
VIBRATIONS
• Plan the work so that exposure to heavy
vibrations is spread over a longer period.
• To reduce noise and vibrations when in
use, limit the time the tool is in use,
and use low-power/vibration mode
and suitable safety equipment.
• Take the following precautions to
minimise the risks of exposure to
vibrations and/or noise:
– Only use the tool in accordance with
these instructions.
– Check that the tool is in good
condition.
– Use accessories in good condition, and
which are suitable for the purpose.
– Keep a firm grip on the handles/grips.
– Maintain and lubricate the tool in
accordance with these instructions.
SYMBOLS
Read the operating
instructions.
Wear eye and ear protection.
Wear a dust filter mask.
Wear safety gloves.
Safety class II.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
Power consumption
Speed, no load
Blade capacity
Table
Height adjustment
Inclining the blade
Cutting depth 45°
Cutting depth 90°
Cable length
Connection, extractor
Dimensions
Weight
Sound pressure level, L P A 99.6 dB(A), K = 3 dB
Sound power level*, L w A 112.6 dB(A), K = 3 dB
230 V ~ 50 Hz
1500 W
5000 rpm
Ø 210 x 30 mm
502 x 465 mm
0 – 70 mm
0° – 45°
45 mm
70 mm
2 m
Ø 35 mm
676 x 502 x 264 mm
10 kg
EN
33