Operation; Fuse Replacement - Conrad Electronic VOLTCRAFT 2181308 Mode D'emploi

6. Operation

a) Operation
• Identify the appropriate plug-in adapter from the selection of adapters provided.
• Plug the adapter into the socket. Make sure that the polarity is correct and matches the
polarity required by the connected device.
• The polarity can be determined by inserting the plug-in adapter into the socket of the
connecting lead.
• The "TIP" marking on one side of the socket of the connecting lead and the "+" or "-" symbol
on the plug-in adapter are important here.
• First plug the adapter into the device that is to be powered.
• Then insert the universal connector into your vehicle's electrical system socket (low voltage
power source).
b) Fuse Replacement
If the built-in LED in the multi-purpose connector is no longer lit, the built-in fuse has blown.
To replace the fuse, proceed as follows:
• Unscrew the front cover of the multi-purpose connector.
• Replace the faulty fuse by a fuse of the same type having the same tripping characteristic
and the same rated current.
• Screw the front cover of the multi-purpose connector back on.
12