Intended Use; Delivery Content; Safety Instructions - Conrad Electronic VOLTCRAFT 2181308 Mode D'emploi

3. Intended Use

This connector set is designed to connect a small load to a vehicle's electrical system socket
(low voltage power source). It is only suitable for direct voltage and a maximum load of 12 V/DC,
1.5 A. Refer to the technical data in the operating instructions for the low voltage power source
that you are using, as well as the connected device.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.

4. Delivery Content

• Vehicle dashboard connector
• Connector set
• Operating instructions
Up-to-Date Operating Instructions
1
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.

5. Safety Instructions

Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
10