Control Panel Leds; Task 5: Configure Filecruiser - FileCruiser VA2600 Guide De Démarrage Rapide

Promise Technology

CONTROL PANEL LEDS

When system boot-up is finished, use the LEDs on the controller on the rear of the
device to monitor various functions (described below).
LED Description (refer to product manual for more details)
System Fan A steady GREEN LED indicates normal fan function. A RED LED
indicates fan failure, the fan must be replaced.
Ethernet The LED located on below each port, on the left side, lights GREEN
when connected, flashes GREEN when there is activity on the port
Link/Act and
and remains dark no connection has been established. The LED on
Speed
the lower right of each port indicates connection speed, GREEN is
100 Mbps, ORANGE is 1000 Mbps.
Figure 15: FileCruiser control panel LEDs
Fan Status

TASK 5: CONFIGURE FILECRUISER

The FileCruiser VA2600 is now ready for inputting setup instructions from the system
administrator. Please refer to the FileCruiser Quick Configuration Guide for setup
instructions.
Gigabit Ethernet port LEDs
18