EN
BEFORE USING THE APPLIANCE
2
General warnings
WARNING: Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other than
those recommended by the manufacturer.
WARNING: Do not use electrical appliances inside
the food storage compartments of the appliance, unless
they are of the type recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: When positioning the appliance, ensure
the supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket-
outlets or portable power supplies at the rear of the
appliance.
WARNING: In order to avoid any hazards resulting
from the instability of the appliance, it must be fixed in
accordance with the following instructions:
If your appliance uses R600a as a refrigerant (this
information will be provided on the label of the cooler) you
should take care during transportation and installation to
prevent the cooler elements from being damaged. R600a
is an environmentally friendly and natural gas, but it is
explosive. In the event of a leak due to damage of the
cooler elements, move your fridge away from open flames
or heat sources and ventilate the room where the
appliance is located for a few minutes.
• While carrying and positioning the fridge, do not
damage the cooler gas circuit.