Williams-Sonoma SIGNATURE TOUCH Série Mode D'emploi page 6

Plug the power cord into a 120V AC 3-prong electrical outlet. POWER will begin to slowly appear and then
pulse slowly on and off. (See Figure 3, SLEEP Mode). When POWER is pressed, a beep can be heard and the
main menu (See Figure 4, Main Menu) will appear.
FIGURE 3
SLEEP MODE
Follow the detailed instructions described in this instruction manual, BREW NOW or BREW LATER.
When brewing is complete, 3 beeps can be heard. The coffee maker will display 0:00, as it advances to
KEEP WARM mode.The time will begin to count up to 2:00 hours. (See Figure 5)
IMPORTANT! Press STOP at any time to turn the coffee maker OFF.
FIGURE 5
At the end of 2 hour KEEP WARM, 3 beeps can be heard as the coffee maker turns itself OFF.
CAUTION: Always make sure the lid is aligned with the spout before pouring hot coffee. (See Figure 1)
SETTING THE CURRENT TIME
When the coffee maker is plugged in, POWER will begin to slowly appear and then pulse slowly on and off.
When POWER is pressed, a beep can be heard and the default time 12:00 AM will be displayed.
(See Figure 6)
FIGURE 6
Press (+) to advance time in 1-minute increments. Press and hold (+) to fast advance in 15-minute
increments.
8
SO-313692_15324_W&S Programmable Glass Coffee Maker_W&S_IM_R11.indd 8-9
FIGURE 4
MAIN MENU
KEEP WARM
SET CURRENT TIME
Press (–) to reduce time in 1-minute increments. Press and hold (–) to fast reverse in 15-minute
increments.
NOTE: Pay attention to AM and PM setting.
When the correct current time is displayed, press (√).
NOTE: The coffee maker will advance to SLEEP mode within 30 seconds if (√) is not pressed
and the current time will NOT be set.
To re-set the clock, unplug the coffee maker.
NOTE: When the coffee maker is unplugged, the number of uses before CLEAN will be re-started.
BREW NOW
Press POWER.
BREW NOW and BREW LATER will illuminate. The current time will be displayed. (See Figure 4)
Press BREW NOW. The BREW STRENGTH icon illuminates and regular (•) BREW STRENGTH begins
to pulse. By default, (•) Regular BREW STRENGTH is activated, and 1 LED light will illuminate.
(See Figure 7)
FIGURE 7
Adjust BREW STRENGTH
To adjust the BREW STRENGTH, press (+) PLUS to increase from (•) Regular to (••) Gourmet to (•••)
Bold. Press (–) to decrease BREW STRENGTH.
NOTE: For your convenience, the last chosen BREW STRENGTH will be the default for the next carafe
of brewed coffee.
To confirm your choice, press (√). A beep can be heard. BREW NOW will pulse as coffee begins
to brew.
IMPORTANT! Press STOP at any time to turn the coffee maker OFF.
When brewing is complete, 3 beeps can be heard. The coffee maker will display 0:00, as it advances
to KEEP WARM. The time will begin to count up to 2:00 hours.
At the end of the 2 hour KEEP WARM, 3 beeps can be heard as the coffee maker turns itself OFF.
CAUTION: Always make sure the lid is aligned with the spout before pouring hot coffee. (See Figure 1)
9
2016-09-15 3:04 PM