Allied Vision Prosilica GT Guide De Démarrage Rapide page 14

Powering up the camera
Plug the 12-pin Hirose connector into the camera and wait for the boot phase to
complete.
Hirose 12-pin connector: colors and pins for power supply
When connecting an open-ended cable to a Hirose 12-pin connector, ensure
that the pins are connected to the correct wire as described in the table below.
Note that for powering up the camera, the power connection is necessary only.
1 9
2
8
10
3
11 12 7
4
6
5
Pin Color Signal
Camera
1 Blue
GND
Camera
2 Red
Power
I/O Level
GND for
In RS232 and
ext. power
7 to
In
25 VDC
Description
Ground for
camera
power supply
and RS232
Camera
power supply
14