5 MANAGEMENT
5.1. STORAGE
All the pumps must be stored indoors. in a dry. vibration-free and dust-free environment, pos-
sibly at constant air humidity.
They are supplied in their original packaging and must be kept there until installation.
5.2.
TRANSPORT
Avoid subjecting the products to needless jolts or collisions.
The electropumps must never be carried or lifted by their power cables.
6 WARNINGS
6.1. QUALIFIED PERSONNEL
Installation should be performed by skilled and qualified personnel, in possession of the
technical qualifications required by the specific regulations in force.
The term qualified personnel
-
6.2. SAFETY
-Never let the pump run dry.
The pumps must never be carried, lifted or operated hanging from their power cables.
could cause damage and accidents.
6.3. MOTOR SHAFT ROTATION CHECK
sure that the moving parts are rotating freely.
For this reason:
-Disconnect completely the motor pump from the electric system.
-Place the motor pump horizontally.
self-locking nut through the hole under the pump.
- Turn over the motor pump and install it as indicated in chapter 7.
18