Troubleshooting - Kenwood KDC-BT370U Mode D'emploi

References
(For )
Each time you press DISP, the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO INFO", or other information
(eg. station name) appears or display will be blank.
Clock time
Source name Display information: Main display
STANDBY Source name Date
RADIO Frequency Date
For FM Radio Broadcast Data System stations only:
Station name/Program type
song title/Radio text+ artist
CD or USB For CD-DA:
Disc title/Artist Track title/Artist
beginning
For MP3/WMA/AAC/WAV/FLAC files:
Song title/Artist Album title/Artist
time Date back to the beginning
iPod USB/iPod BT Song title/Artist Album title/Artist
beginning
SIRIUS XM Channel number Channel name
information Category name
BT AUDIO Song title/Artist Album title/Artist
beginning
AUX Source name Date
Main display
Level meter (Page 27)
back to the beginning
back to the beginning
Radio text Radio text+ Radio text+
Frequency Date back to the beginning
Playing time Date back to the
Folder name File name
Playing time Date
Artist Song title Content
Date back to the beginning
Playing time Date
back to the beginning

Troubleshooting

Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
Source cannot be selected.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.
Correct characters are not
displayed.
(For
Playing
"SET ERROR"/"DEL ERROR"
back to the
(For
"ERROR"/"FAILED"
• Radio reception is poor.
• Static noise while listening
back to the
to the radio.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 6)
Clean the connectors. (Page 33)
Reset the unit. (Page 4)
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 7), some characters may not be displayed
correctly.
Setting/deleting the remote control ID is unsuccessful.
)
Turn the power off, then turn on the power and perform
the operation again. (Page 7)
Your steering remote controller is not compatible,
)
learning may not be completed. Consult your car audio
dealer for details.
Connect the antenna firmly.
35
ENGLISH