Publicité
Les langues disponibles
Les langues disponibles
Connect the power plug after filling with water and close the lid. (1
Starts boiling
automatically.
Light on
Charging battery indicator (for cordless
dispensing)
Light on
Press
Press
Automatically locked in 10 seconds after
dispensing is finished.
Charging battery indicator. (for cord-
less dispensing)
Guideline for dispensing volume
Battery charge
volume
Approx. 3L or more (4.0L type)
Almost full volume (3.0L types) w 1
1.5L or less
Water temperature falls about 194°F(90°C) in 3 hours after boiling. (3.0L type) at room temperature
68°F(20°C)
*
Temperature falls quicker if water volume is less.
Unplug, and remove the lid. Pour out any remaining hot water slowly via
the
Lid release part
Notifies when boiled.
Light off
Light on
Press to
Pour
Dispensing volume
When the unit is not in use
mark.
Operation panel
beep beep
beep beep
When changing the setting of keep warm temperature (☞ P. 19)
When adjusting the temperature suitable for tea (☞P. 19)
Dispensing speed of hot water varies depending on
degree of pressing and dispensing time.
Dispensing period (Amount of time to press continuously)
Less than 5 seconds From 5 to 12 seconds More than 12 seconds
Press slightly
Press strongly
* Be careful of hot water splashing if pressed too strongly
With cordless dispensing, and before the water
boils, there are only two speeds
*
1 Full water volume may not be indicated if dispensed
frequently .
Indication lights off and cannot dispense hot water
●
after 8-10 hours even if not dispensed.
Cautions
Do not pour out water too quickly.
●
If water is splashed over lid release section or
operation panel, it may cause a malfunction.
Do not leave water standing in the container.
●
It may cause the container to corrode or smell.
→
2)
Fall in temperature
(
)
Automatically switches
to 190 keep-warm
Water temperature indicator
17
Publicité
