Peaq PDR100 Mode D'emploi page 40

ENGLISH
11. The volume bar will be displayed. Use
Scroll to set the desired alarm tone
volume.
12. Press Scroll to confirm the volume setting.
13. The alarm settings are stored and [alarm
saved] is displayed.
ACTIVATING OR DEACTIVATING THE
ALARM TIMER
Press ALARM, to access the alarm settings
menu.
Turn Scroll to activate or to deactivate the
alarm.
[Alarm On] Or [Alarm Off] is displayed.
REPEAT ALARM
When the alarm sounds, press Scroll to select
the slumber function interval:
[Snooze 5 minutes]
The alarm repeats after 5 minutes.
[Snooze 10 minutes]
The alarm repeats after 10 minutes.
[Snooze 15 minutes]
The alarm repeats after 15 minutes.
[Snooze 30 minutes]
The alarm repeats after 30 minutes.
TURNING OFF THE ALARM
When the alarm sounds, press Power to turn
the alarm off.
40
PDR100_IM_03.indb 40
SETTING THE SLEEP-TIMER
After a pre-selected amount of time, this unit
can automatically change to standby mode.
Press Menu and use Scroll to select the sub-
menu SLEEP. Press Scroll and selected the
desired time span:
[15 minutes]
[30 minutes]
[45 minutes]
[60 minutes]
[90 minutes]
If the sleep timer is not pre-selected, the
default setting is 20 minutes.
SELECTING THE BACKLIGHT SETTINGS
1. Press Menu and use Scroll to select the
sub-menu BACKLIGHT. Press Scroll to
access the sub-menu:
2. Use Scroll to choose between POWER
ON and STANDBY.
3. In the sub-menu, select an illumination
setting:
[High]
[Medium]
[Low]
4. Confirm your selection by pressing the
Scroll button.
9/27/12 6:07 PM